Split Spring Washer
A Split Spring Washer has a single cut that creates a spring action. This split washer has a 8 mm nominal size with a 1.2 mm material thickness. The washer has a 1.0 mm opening gap at the split.
Simple and Effective
A Split Spring Washer has a single cut that creates a spring action. This split washer has a 8 mm nominal size with a 1.2 mm material thickness. The washer has a 1.0 mm opening gap at the split. Many general engineering shops use this washer for motor and pump assemblies. The washer provides a simple locking solution for standard bolting.
Standard Pitch Design
The Split Spring Washer has a 0.8 mm pitch that creates a square cross-section. The washer has a 90-degree twist at the split for consistent grip. The washer has a 0.3 mm deflection under rated load. The product is made from carbon steel with a bright zinc plating. The plating has a 5 micron thickness for basic corrosion resistance. This split washer has a 3 year warranty against stress relaxation.
|
Parameter |
Value |
|
Nominal Size |
8 mm |
|
Material Thickness |
1.2 mm |
|
Pitch |
0.8 mm |
|
Gap Opening |
1.0 mm |
|
Plating |
Zinc |
Good for General Assembly
A product is the standard choice for everyday bolt locking. This split washer has a 3 year warranty on the plating adhesion. The washer has a 0.6 g weight for an 8 mm size. The washer has a 25 kN load capacity for standard applications. The Split Spring Washer has a 100°C maximum service temperature. Buy this split washer for your workshop needs. The simple design works on most standard bolts.
Customization Options
We offer custom sizes from 3 mm to 36 mm with competitive pricing. We also provide custom finishes including black oxide, yellow zinc, and mechanical galvanizing. Need a specific gap tolerance? We can tighten or widen the split gap to your specification.
Why Our R&D and Fast Delivery Help You
We have our own R&D team. You can share your special needs. We will help solve your technical problems. Free samples are ready for stock items. Mass production takes 2-3 weeks for standard parts. Custom products take 4 weeks. Repeat orders are even faster. The elongation rate for 65MN is ≥10%. So the washer will not crack during installation. It works with regular bolts, high-strength bolts, and stainless steel bolts. You do not need to change your tools.
The entire product line is fully customizable.
FAQ
Q: Is there a correct orientation for products?
A: Yes, the split should face upward or sideways. The washer should compress to pull the split tighter against the bolt.
Q: Do you provide material certificates?
A: Yes, each batch includes a mill test certificate showing chemical composition and tensile strength.
Q: What is your MOQ for custom sizes?
A: Custom sizes have a 500 piece MOQ. Standard sizes are available from stock with no MOQ.
Hot Tags: split spring washer, China split spring washer manufacturers, suppliers, factory, High Tensile Spring Washer, National Disc Spring, Non standard Gaskets, Precision Flat Washers, Shaft Retaining Rings, washers
