News

The installation sequence of the "golden duo"—the spring washer and the flat washer—directly impacts the reliability of a bolted joint.

It is placed beneath a nut to prevent it from loosening.

The tool used to cut the inner ring of a gasket is typically referred to as a "compass cutter" or "hook knife."

Thermal conductivity of 0.041–0.045 W/(m·K); fire-resistant and flame-retardant, but exhibits high moisture absorption and relatively poor thermal ...

Gaskets are classified into three major categories based on their constituent materials: non-metallic, semi-metallic, and metallic gaskets.

The sealing gasket and the flange sealing face must be thoroughly cleaned; they must be free of any defects—such as scratches or blemishes—that cou...

A washer is a component placed between a fastener and a nut; it typically takes the form of a flat metal ring.

A gasket is a mechanical seal situated between two objects, typically employed to prevent leakage caused by pressure, corrosion, or the natural the...